EP Solven Sint 47 Specification and Safety Information
It is an emulsion of synthetic waxes in an aqueous medium, with high physical-chemical stability, resistant to acid or alkaline medium. The high stability gives it the characteristics of an anti-abrasion agent, sliding agent and, above all, being an excellent water repellent.
See the tests, specification, Solven method and reference method in the PDF file available for download.
APPLICATION / MAIN USES
Used in the manufacture of textures, inks and graphite acting as a hydrophobic agent. It can be used as an abrasion resistance agent.
PACKAGING, STORAGE AND HANDLING
Product must be kept in a cool, dry place, protected from bad weather. The supply is made through drums, containers and in bulk. The shelf life of this product is 02 months from the date of manufacture, under the recommended storage conditions and/or original packaging.
CLASSIFICATION FOR TRANSPORT
This product is not classified as dangerous according to the transport legislation in force.
ADOPTED CLASSIFICATION SYSTEM
Standard ABNT-NBR 14725-Part 2: 2009. Adoption of the Globally Harmonized System for the Classification and Labeling of Chemicals, UN.
Keep the product in a cool, dry and well-ventilated place, away from sources of heat and ignition. Keep containers tightly closed and properly labeled. The storage place must have an impermeable floor, free from oxidizing materials and with a containment dam to retain in case of leakage. Store preferably away from light. Keep away from incompatible materials. No need to add stabilizers and antioxidants to ensure product durability.
PHYSICAL AND CHEMICAL PROPERTIES
- Physical state: Liquid;
- Form: Liquid;
- White color.
Odor: Low ammonia odor.
Odor threshold: Not available.
pH: 4.0 – 6.0.
Melting point/freezing point: Not available.
Initial boiling point and boiling temperature range: Not available.
Flash point: Not Applicable.
Evaporation rate: Not available.
Flammability: Not Flammable.
Lower/Upper Flammability or Explosive Limit: Not Applicable.
Vapor Pressure: Not Available.
Vapor Density: Not Available.
Relative density: 0.920 – 0.990 at 25°C (water as standard).
Solubilities: In water – Soluble.
Partition coefficient – n-octanol/water: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Viscosity: 15.0 – 30.0 (Cop Ford #4 at 25°C).
STABILITY AND REACTIVITY
Reactivity: Not Available.
Chemical stability: Stable under normal conditions of use. It does not undergo polymerization.
Possibility of hazardous reaction: Not available.
Conditions to Avoid: Heat, heat sources, incompatible materials.
Incompatible materials: Strong oxidizing agents such as peroxide, chlorates and chromic acid.
Hazardous Decomposition Products: Not Applicable.
- Skin Corrosion/Irritation: Product causes mild irritation on prolonged skin contact;
- Serious eye damage/eye irritation: May cause mild irritation on contact with eyes;
- Respiratory or skin sensitization: Not Applicable;
- Germ cell mutagenicity: Insufficient information for classification;
- Carcinogenicity: This product is not classified as a carcinogen;
- Reproductive toxicity: Insufficient information for classification;
- Specific target organ toxicity – single exposure: Insufficient information for classification;
- Specific target organ toxicity – repeated exposure: Insufficient information for classification;
- Aspiration hazard: Product vapor can enter the lungs and cause damage such as: Chemical pneumonia.
Ecotoxicity: The product is not expected to present a hazard to aquatic organisms.
Persistence and Degradability: Not Available.
Bioaccumulative Potential: Not Available.
Ground mobility: Not available.
Other Adverse Effects: Not Available.
CONSIDERATIONS ON FINAL DESTINATION
Recommended disposal methods: This product can be reprocessed, incinerated in suitable facilities or sent for co-processing. Check in your Municipality and/or in your State, the applicable legislation on final disposal.
Used packaging: When the packaging is empty, contaminated with the product, it can be sent to packaging recycling companies authorized by the environmental agency.